Ilia Mirkin wrote:
You want to use the wcfxo module with the X100P. wcfxs is for the
TDM400P card.
On Wed, 2004-10-13 at 03:43, Neil Cherry wrote:
I'm in the process of setting up the X100P card and I am getting
continuous tone on the X100P but only if plugged into the POTS
line. Here is what I have so far:
# lsmod
Module Size Used by
wcfxs 26912 0
zaptel 223460 1 wcfxs
crc_ccitt 1920 1 zaptel
# cat /etc/zaptel.conf
#
loadzone = us
defaultzone=us
fxsks=1
Thanks! That's a little better. The error has gone away but I still get
the tone on the line. I'm certain I'm plugged into the correct jack.
# ztcfg -vv
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
# lsmod
Module Size Used by
wcfxo 12064 0
sg 23708 0
zaptel 223460 1 wcfxo
crc_ccitt 1920 1 zaptel
rtc 10424 0
usbcore 108644 1
mxser 25948 0
via_rhine 17416 0
--
Linux Home Automation Neil Cherry [EMAIL PROTECTED]
http://home.comcast.net/~ncherry/ (Text only)
http://hcs.sourceforge.net/ (HCS II)
http://linuxha.blogspot.com/ My HA Blog
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users