Hi,
But this is not my problem.
Asterisk have a public IP.
The NAT occurs on "road" clients. I don't have control in this to make a port forward. If anyone have connect to me, I simply give a URL like:
iax://user:[EMAIL PROTECTED]
And the user connects and talk perfectly. But after this, I want to call this user from my asterisk and this is not possible.
P.S. : I don't find in FireFly nothing about the register time...
Thanks for all.
Garry Taylor wrote:
Open UDP port 4569 in your NAT and point it to the IP address of your *. Works great for me!
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Wieling
Sent: Thursday, 21 October 2004 10:25 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Calling IAX client behind NAT
Tell the client to register every 60 seconds.
alexandre::aldeia digital wrote:
Hi Joe,
The clients are FireFly softphone. After setting qualify=yes, The asterisk give me the error:
Oct 21 10:23:23 NOTICE[8200]: chan_iax2.c:6155 iax2_poke_noanswer: Peer
'teste' is now UNREACHABLE! Time: 0
*CLI> iax2 show peers
Name/Username Host Mask Port
Status
teste 200.x.x.x (D) 255.255.255.255 4569
UNREACHABLE
And I still can't connect to him.
iax.conf:
[teste] type=friend host=dynamic secret=<snip> callerid="9955" qualify=yes
Thanks for any help.
Alexandre
Joe Dennick wrote:
Add Qualify=yes
To the iax.conf file entry for this client. That causes
the client
to continue to contact the Asterisk server, thereby keeping the session alive through the NAT. Then when a call is imitated from Asterisk to the client, it will just progress through the already established session (the NAT device will actually assume it's a response to a client-imitated request).
Joe
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alex Barnes
Sent: Thursday, October 21, 2004 7:07 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Calling IAX client behind NAT
Try port forwarding 4569 on the client side.
All the claims of "IAX doesn't require prt forwarding" on the wiki site confused the hell out of me as I couldn't get incoming calls working.
Cheers
alex
-----Original Message-----
From: alexandre::aldeia digital
[mailto:[EMAIL PROTECTED] Sent: 21
October 2004 12:06
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Calling IAX client behind NAT
Hi,
Sorry if this is a stupid question. Can I call a dynamic
registered
IAX client localized behind a NAT ?
Client(Firefly,DIAX) --> NAT --> INTERNET --> * (public IP) --> SPA-2000
(192.168...)
The client can make calls to asterisk normally. But I
can't call the
client(lol...:). With a tunnel (VPN) this functions ok, but is to difficult to configuration by a simple user.
The great deal with IAX is the extreme facility to connect
without any
configuration. In FireFly, dial a URL
iax://user:[EMAIL PROTECTED] is easy
to explain and maintain.
Thanks,
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
