Sir,
Thanks for the reply. I have tried the callprogress in zapata and it was not reliable for me. I have tried the backgrounddetect and it does not give me busy indications.
Dialogic had a callprocess function that gave busy status, waited for voice energy (some one saying hello) so you new when the phone was answered etc...
I am not finding an all encompasing similar function in asterisk yet.
Any further suggestions are welcome.
Jerry
-----------------------
Hello,
On Thu, 21 Oct 2004 10:43:01 -0500, Jerry Geis <geisj at pagestation.com <http://lists.digium.com/mailman/listinfo/asterisk-users>> wrote:
/ I am attempting to place a call in the outgoing spool directory
/>/ once that call is placed run my agi. I am using analog cards. / The problem is that there is no reliable call progress on ANALOG lines. Asterisk just set the channel as ANSWERED or UP as soon as a call is placed.
You can try enabling callprogress in /etc/asterisk/zapata.conf , but you might have unreliable progress detection and many false hangups. The comments on zapata.conf state:
; On trunk interfaces (FXS) it can be useful to attempt to follow the progress
; of a call through RINGING, BUSY, and ANSWERING. If turned on, call
; progress attempts to determine answer, busy, and ringing on phone lines.
; This feature is HIGHLY EXPERIMENTAL and can easily detect false answers,
; so don't count on it being very accurate. Also, it is ONLY configured for
; standard U.S. tones
You might also want to take a look at application BackgroundDetect, just issue:
show application BackgroundDetect
from the CLI
Good luck,
-- Nicolás Gudiño Buenos Aires - Argentina
--
Jerry Geis MessageNet Systems 101 East Carmel Dr. Suite 105 Carmel, IN 46032 (317)566-1677 (240)282-0319 Fax _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users