Hi folks, I have setup my Cisco 827-4V to talk to asterisk, with success. I can make and receive calls. The world is good.
I am wondering however about extra features - putting people on hold and parking calls and so on. These features seem to require me to use hookflash. I am unsure if hookflash is supported on this router. This page: http://www.ciscopress.com/articles/article.asp?p=31445&seqNum=2 has the following text: The commands voice-port X and timing hookflash-in 0 turn off any hookflash indications that the gateway could generate on an FXO interface. Currently the Cisco 827-4V does not support hookflash indications, although that support is probably pending, because it is already available on other Cisco platforms with H.323 Version 2 Phase 2. On an analog phone, hookflash means pressing the switchhook for a moment (about one-half second) to produce a special stutter dial tone. This engages supplemental services, such as call waiting. My IOS is version: IOS (tm) C820 Software (C820-V6Y6-M), Version 12.2(15)T10, RELEASE SOFTWARE (fc2) Does anyone know if it can be done with this router, or know of any workarounds? Cheers, Justin -- Justin Hawkins | [EMAIL PROTECTED] _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
