Hello everybody,
I'm a new user of * and I just bought a Sipura SPA-3000 to make a home voip installation. I actually have a problem when a PSTN user calls and hangs up. The disconnect tone is not detected by the SPA, the the call continues and, for example, leaves an empty message on the voicemail before hanging up (because * hangs up).
I tried to define a disconnect tone description this way : [EMAIL PROTECTED],[EMAIL PROTECTED];2(.5/.5/1+2) I'm located in France. The disconnection tone is the same as the busy tone and I found a description on that website : http://resource.intel.com/telecom/support/appnotes/FRvoice.htm#a5
"The CO Busy Tone (CO_BT) This tone is generated by the CO when the D/41E-FR voice board calls an already engaged party or after the called party has terminated the conversation phase by hanging up the phone. If the D/41E-FR receives the busy tone while dialing, it has to release the line immediately. Frequency: 440 ± 34 Hz Cadence: 500 ± 50 ms ON,500 ± 50 ms OFF. Validation time: 4 ON/OFF cycles."
Does anyone have the same kind of problems with spa3k ? Is there a french spa3k user around ?
Thanks a lot for your help ;)
Yves-Marie
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users