I'm trying to configurate my first asterisk system.
My test plant has an E100P Card and a 4 FXS TDM 400P card.
I've an E1 configured for 15 channels.
Telco says that crc4 is configurated so my zaptel.conf is:
loadzone = it
defaultzone=it
span=1,0,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
unused=17-31
fxoks=32-35
zttool shows no alarms.
I've also tried changing the timing configuration.
== Primary D-Channel on span 1 up
== Primary D-Channel on span 1 up
Oct 26 14:15:56 WARNING[11275]: chan_zap.c:7133 zt_pri_error: PRI: !! Not good - head of queue has not been transmitted yet
== Primary D-Channel on span 1 down
Oct 26 14:15:57 WARNING[11275]: chan_zap.c:1913 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16!
Does anyone have any idea what's wrong ?
Maybe your E1 is configured for CAS not CCS. At least that caused a similar error for me.
Chris _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
