Thanks, this helps a ton, we get our PRI's from a CLEC we work with, this will help them provide the info I require.
Regards Michael Baird > Michael, > I have asked a very similar question over the past week and gotton no > answer... Seems like no one here knows much about it...or just doesn't want > to wade in.. > > Here is what I have found out so far. The RDNIS field should be populated > with the ISDN PRI Redirecting Number Information Element *IF* your PRI > provider has that option turned on. Different switches handle this option > differently. In our case the switch is a Lucent 5ESS and our provider was > told by Lucent that this feature is not available (BS). After more research, > reading the ISDN Spec > (http://www.itu.int/rec/recommendation.asp?type=foldersâ=e&parent=T-REC- > Q.931) and the AT&T version of the spec > (http://www.att.com/cpetesting/pdf/tr41459_99.pdf - See part III Section > 3.6.6.7 Redirecting Number), and speaking with a knowledgable switch tech as > a lab we use we where able to determine that on the 5ESS this option could > be enabled (page 5.1 Field 152 STDRNSRC=YES, Requires Secure Feature 161 > enabled) but that this may require that your provider purchase a feature (or > feature pack) that they may not have enabled. > > All this being said we are still waiting to get this enabled so we can start > testing with it. > > I suspect that you are in a similar situation. You may need to become a bit > of an ISDN expert in order to explain to the switch tech specifically what > option you want enabled... Start with the references above, find out what > switch you are connected to and go from there. > > -- Mike > > > I'm trying to use RDNIS with asterisk, and I don't appear to be > > receiving any information (the value is blank). The upstream who > > provides the PRI says they are passing all the info through, I don't see > > this value coming across. I've tried it with a Verizon call forward, as > > well as a Nextel with the same results for both. I'm trying to use this > > for Voicemail. I'm using CVS-HEAD-10/16/04, any advise or pointers would > > be appreciated. I get the called from fine, and it puts the forwarded to > > number as the called to, the RDNIS value is blank. > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
