The hard disk on an old system with an ISA card just died and I
reloaded a more modern OS (Fedora Core 1) and asterisk, but I wonder
what I need to do to get ISA support working.
# /etc/init.d/zaptel start
Loading zaptel framework: [ OK ]
Loading zaptel hardware modules: wcusb
Running ztcfg: ZT_SPANCONFIG failed on span 1: No such device or address (6)
[FAILED]
# grep torisa /etc/mod*conf
/etc/modprobe.conf:options torisa base=0xd0000 <--same as before
/etc/modprobe.conf:alias char-major-196 torisa
/etc/modprobe.conf:post-install torisa /sbin/ztcfg
If I try a manual modprobe:
# modprobe torisa
/lib/modules/2.4.22-1.2115.nptl/misc/torisa.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO
or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.22-1.2115.nptl/misc/torisa.o: insmod
/lib/modules/2.4.22-1.2115.nptl/misc/torisa.o failed
/lib/modules/2.4.22-1.2115.nptl/misc/torisa.o: insmod torisa failed
Any ideas? Thanks...
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
