Hello kietlak and others,

> > Any clues to what happens here?
> > Seems the communication asterisk=>Tenovis does not work. 
> And why is the
> cause not handled in chan_zap?
> 
> Send your zaptel.conf and ANZG output from AOGD.

Sorry, but i only managed apprenticeship on all those 3-letter-acronyms, the 4-letters 
are way out of reach for me ;-)

I don't know what you mean by anzg and aogs, but here are zaptel and zapata Config as 
well as the bri debug stuff from the failing conversation between asterisk and the 
tenovis pbx.
Identical setup works on german telco (Deutsche Telekom Anlagenanschluss) lines 
plugged to the four BRIs.

Hope someone can point me to a direction where to look further, as we seem stuck right 
now.

Stefan Märkle






==================== bri debug span 1 
========================================================================
asterisk*CLI> bri debug span 1
Enabled debugging on span 1
    -- Registered 'stefanm' (AUTHENTICATED) at 10.13.253.154:4569 < Protocol 
Discriminator: Q.931 (8)  len=43 < Call Ref: len= 2 (reference 39/0x27) (Originator) < 
Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1  
Q.931 Std: 0  Info transfer capability: Speech (0)
<                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
<                              Ext: 1  User information layer 1: A-Law (35)
< [18 01 82]
< Channel ID (len= 3) [ Ext: 1  IntID: Implicit, Other Spare: 0, Preferred Dchan: 0
<                        ChanSel: B2 channel
                         ]
< [6c 0c 21 80 37 32 31 39 32 30 36 30 31 32]
< Calling Number (len=14) [ Ext: 0  TON: National Number (2)  NPI: ISDN/Telephony 
Numbering Plan (E.164/E.163) (1)
<                           Presentation: Presentation permitted, user number not 
screened (0) '7219206012' ]
< [70 05 81 36 39 35 31]
< Called Number (len= 7) [ Ext: 1  TON: Unknown Number Type (0)  NPI: ISDN/Telephony 
Numbering Plan (E.164/E.163) (1) '6951' ] < [7c 03 80 90 a3] < IE: Low-layer 
Compatibility (len = 5) < [7d 02 91 81] < IE: High-layer Compatibility (len = 4)
-- Making new call for cr 39
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
-- Processing IE 124 (cs0, Low-layer Compatibility)
-- Processing IE 125 (cs0, High-layer Compatibility)
> Protocol Discriminator: Q.931 (8)  len=7
> Call Ref: len= 1 (reference 167/0xA7) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 01 8a]
> Channel ID (len= 3) [ Ext: 1  IntID: Implicit, Other Spare: 0, Exclusive Dchan: 0
>                        ChanSel: B2 channel
                         ]
    -- Executing Answer("Zap/2-1", "") in new stack
    -- Accepting call from '7219206012' to '6951' on channel 0/2, span 1
> Protocol Discriminator: Q.931 (8)  len=11
> Call Ref: len= 1 (reference 167/0xA7) (Terminator)
> Message type: CONNECT (7)
> [18 01 8a]
> Channel ID (len= 3) [ Ext: 1  IntID: Implicit, Other Spare: 0, Exclusive Dchan: 0
>                        ChanSel: B2 channel
                         ]
> [1e 02 81 82]
> Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   
> Location: Private network serving the local user (1)
>                               Ext: 1  Progress Description: Called 
> equipment is non-ISDN. (2) ]
    -- Executing MP3Player("Zap/2-1", "/usr/share/asterisk/sounds/pioneer.mp3") in new 
stack < Protocol Discriminator: Q.931 (8)  len=41 < Call Ref: len= 2 (reference 
39/0x27) (Originator) < Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability 
(len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer capability: Speech (0)
<                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
<                              Ext: 1  User information layer 1: A-Law (35)
< [6c 0d 21 80 30 37 32 31 39 32 30 36 30 31 32]
< Calling Number (len=15) [ Ext: 0  TON: National Number (2)  NPI: ISDN/Telephony 
Numbering Plan (E.164/E.163) (1)
<                           Presentation: Presentation permitted, user number not 
screened (0) '07219206012' ]
< [70 05 80 36 39 35 31]
< Called Number (len= 7) [ Ext: 1  TON: Unknown Number Type (0)  NPI: Unknown Number 
Plan (0) '6951' ] < [7c 03 80 90 a3] < IE: Low-layer Compatibility (len = 5) < [7d 02 
91 81] < IE: High-layer Compatibility (len = 4)
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
-- Processing IE 124 (cs0, Low-layer Compatibility)
-- Processing IE 125 (cs0, High-layer Compatibility)
< Protocol Discriminator: Q.931 (8)  len=5
< Call Ref: len= 2 (reference 39/0x27) (Originator)
< Message type: DISCONNECT (69)
Oct 27 16:05:07 WARNING[1088519088]: chan_zap.c:6902 zt_pri_error: PRI: XXX Missing 
handling for mandatory IE 8 (cs0, Cause) XXX Oct 27 16:05:07 WARNING[1088519088]: 
chan_zap.c:8128 pri_dchannel: Hangup REQ requested on unconfigured channel 255/255 
span 1 < Protocol Discriminator: Q.931 (8)  len=5 < Call Ref: len= 2 (reference 
39/0x27) (Originator) < Message type: RELEASE (77) Oct 27 16:05:07 
WARNING[1088519088]: chan_zap.c:8061 pri_dchannel: Hangup requested on unconfigured 
channel 255/255 span 1 Oct 27 16:05:08 NOTICE[1109670832]: app_mp3.c:91 timed_read: 
Selected timed out/errored out with 0
    -- Executing Hangup("Zap/1-1", "") in new stack
  == Spawn extension (ISDN_incoming, 6951, 3) exited non-zero on 'Zap/1-1' NEW_HANGUP 
DEBUG: Calling q931_hangup, ourstate Null, peerstate Release Request
> Protocol Discriminator: Q.931 (8)  len=8
> Call Ref: len= 1 (reference 166/0xA6) (Terminator)
> Message type: RELEASE COMPLETE (90)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private 
> network serving the local user (1)
>                  Ext: 1  Cause: Normal Clearing (16), class = Normal 
> Event (1) ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: 
Destroying the call, ourstate Null, peerstate Null
    -- Hungup 'Zap/1-1'
< Protocol Discriminator: Q.931 (8)  len=5
< Call Ref: len= 2 (reference 39/0x27) (Originator)
< Message type: RELEASE (77)
Oct 27 16:05:12 WARNING[1088519088]: chan_zap.c:8061 pri_dchannel: Hangup requested on 
unconfigured channel 255/255 span 1

==================== /bri debug span 1 
========================================================================

==================== kernel messages on load 
========================================================================
Oct 28 16:41:53 asterisk kernel: Zapata Telephony Interface Registered on major 196
Oct 28 16:41:56 asterisk kernel: PCI: Enabling device 0000:00:09.0 (0000 -> 0003)
Oct 28 16:41:56 asterisk kernel: PCI: Found IRQ 10 for device 0000:00:09.0
Oct 28 16:41:56 asterisk kernel: qozap: Junghanns.NET quadBRI card configured at mem 
0xd8816000 IRQ 10 HZ 1000 CardID 0
Oct 28 16:41:56 asterisk kernel: qozap: S/T ports: 4 [ TE TE TE TE ]
Oct 28 16:41:56 asterisk kernel: qozap: 1 multiBRI card(s) in this box, 4 BRI ports 
total.
Oct 28 16:41:57 asterisk kernel: Registered tone zone 3 (Netherlands)

==================== /kernel messages on load 
========================================================================

==================== zapata.conf 
========================================================================
;
; Zapata telephony interface
;
; Configuration file

[channels]
switchtype = euroisdn
signalling = bri_cpe
pridialplan = local
prilocaldialplan = local

echocancel=yes
echocancelwhenbridged=yes

context=ISDN_incoming

group = 1
; S/T port 1
channel => 1,2

group = 2
; S/T port 2
channel => 4-5

group = 3
; S/T port 3
channel => 7-8

group = 4
; S/T port 4
channel => 10-11

==================== /zapata.conf 
========================================================================

==================== zaptel.conf 
========================================================================
loadzone=nl
defaultzone=nl

# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,1,3,ccs,ami
span=3,1,3,ccs,ami
span=4,1,3,ccs,ami

bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12
==================== /zaptel.conf 
========================================================================

==================== extensions.conf 
========================================================================
[general]
static=yes
writeprotect=no

[globals]

[default]
include => voicemail
include => outgoing

[outgoing]
include => voicemail
exten => _XXXXX.,1,Dial(Zap/g1/0${EXTEN})
exten => _XXXXX.,2,Hangup

[ISDN_incoming]
include => voicemail

[voicemail]
exten => 6951,1,Answer
exten => 6951,2,MP3Player(/usr/share/asterisk/sounds/pioneer.mp3)
exten => 6951,3,HangUp
==================== /extensions.conf 
========================================================================


_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to