On Wed, 3 Nov 2004 13:10:57 +0000, [EMAIL PROTECTED] wrote: > On Tue, Nov 02, 2004 at 10:58:39PM +0000, StrUK wrote: > <snip other information> >> I guess my question is: does anyone have polarity reversal hangup >> detection working on a BT line with an fxo module in a TDM400P? >> > > Testing with my fxo module shows that it takes about 8 seconds from > pressing hangup on the mobile phone before hangup is detected in > asterisk (maybe this relates to your 9 seconds). I'm not sure if > this is when the local exchange sends the polarity reversal or if > asterisk is detecting a hangup in some other way. I have > busydetect=no and callprogress=no so I'm (AFAIK) not using any > "fake disconnect functions" as per the keypad lights page[1]. > > If I pick up the phone during the 8 seconds I get a usable > dialtone, which might be worrying if I didn't want people calling > certain numbers. This seems to indicate that the local exchange > knows that the mobile has hungup, as it wouldn't give dialtone in > the middle of call. So perhaps I dont have polarity reversal > hangup detection working, but HTH anyway. > > I'm not using the fxo callerid and asterisk is from cvs checkout > date 14-Aug-2004 (as downloaded from bri-stuff.0.1.0-RC4a) > > my zapata config for the fxo module:
<snip> I have UK callerid enabled and I have the same problem, just haven't got around to asking anyone about it yet! A slight variant on the usual setup is that I've got Home Highway from which I'm taking the two analog channels. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users