Hi, The first thing is I dont see a "username=<username>" in your config.I recommend keeping the username the same as what you have in the brackets, in this case "[201]"
If you are behind a NAT device make sure to add "nat=yes" And if you dont have it configured in the [general] context be sure to handle your codecs. eg: disallow=all allow=ulaw ;or whatever Other than this, are you sure the 2000 is getting an IP address assigned to it. Look in your docs, off hand I think on the touch tone pad of the phone you have plugged into the 2000 you do a "****" then "110" but you'd better check into this incase Im wrong. So, have at it like this: [201] username=201 type = friend host = dynamic secret=201 dtmfmode = rfc2833 context = default [EMAIL PROTECTED] nat=yes canreinvite=no callerid = "201" <201> disallow=all allow=ulaw HTH Ciao, -b Quoting Naren Koka <[EMAIL PROTECTED]>: > I have a SIPURA 2000 which is supposed to register > with the Asterisk server. However it does not register > at all. > > I have two lines registered in the SIP.conf > > [201] > type = friend > host = dynamic > secret=201 > dtmfmode = rfc2833 > context = default > [EMAIL PROTECTED] > canreinvite=no > callerid = "201" <201> -- ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. -- This message has been scanned for viruses and dangerous content by the Bugs.Hamel.Net MailScanner, and appears to be clean. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
