On Thu, 28 Oct 2004 20:05:03 -0600, Olger Merlos Valverde <[EMAIL PROTECTED]> wrote: > I have two office of construction: office_1 and office_2 > > I want connect the two offices by dedicated line, and connect the two analog > PBX > of this offices and transfer VoIP between two offices. > > Ok one time that of two offices connected, I want install of telephone IP on > both office and CALL. And I want call from office_1 to office_2 and office_2 > switch this call to PBX for talk with mi house. > > For this situations what CARDS I need? but I see too many CARDS from digium :) > and I a newbie on this.
at minimum you will need one card: Wildcard X100P ... [IPphone-Office1] | SIP/LAN | [Aterisk-Office1] | IAX/WAN | [Asterisk-Office2]---[Wildcard-X100P]---analog---[PBX-Office2]-->PSTN | SIP/LAN | [IPphone-Office2] SIP IP phones are configured in /etc/asterisk/sip.conf Wildcard X100P card is configured in /etc/zaptel.conf and /etc/asterisk/zapata.conf IAX link between two Asterisk servers is configured in /etc/asterisk/iax.conf Also relevant: /etc/asterisk/extensions.conf for dialplan use all of the above (sip.conf, iax.conf, etc etc) as keywords for search at http://www.voip-info.org for details. rgds benjk -- Sunrise Telephone Systems, 9F Shibuya Daikyo Bldg., 1-13-5 Shibuya, Tokyo, Japan. NB: Spam filters in place. Messages unrelated to the * mailing lists may get trashed. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users