Thomas Andrews wrote: > On Sun, Nov 14, 2004 at 11:46:15AM +0100, Soren Rathje wrote: > >> Can you post your actual configuration ? >> >> /etc/zaptel.conf > > fxols=1 #S100U > fxsls=2 #X100P > loadzone = us > defaultzone=us
Looks fine allthough the comments are wrong :-) > >> /etc/asterisk/zapata.conf > > [trunkgroups] > [channels] > context=default Remove the next two lines, switchtype is related to ISDN circuits and the signalling you specify later in the file. > switchtype=national > signalling=fxo_ls > rxwink=300 > usecallerid=yes ; Type of caller ID signalling in use ; bell = bell202 as used in US, v23 = v23 as used in the UK, dtmf = DTMF as used in Denmark, Sweden and Netherlands ; cidsignalling=bell ; ; What signals the start of caller ID ; ring = a ring signals the start, polarity = polarity reversal signals the start ; cidstart=ring > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > context=internal callerid="House Phone" <1234> # Change to match your settings.. > signalling=fxo_ls You may want to change Loop Start to Kewl Start (fxo_ks) > channel=>1 > context=incoming callerid=asreceived > signalling=fxs_ls You may want to change Loop Start to Kewl Start (fxs_ks) > channel=>2 > /Soren _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users