<snip>
> The idea is that I set the PBX to use several lines for the same
> extension.
> So you could make that a single digit '5' extension or something. Then
> Asterisk picks up and asks for the WAN extension which would route to the
> correct Asterisk box on the other end, which would also have multiple
> lines
> to the PBX.
>
> Is it possible to configure PBXs in such a way? i.e. that multiple lines
> are assigned to the same extension? Is there another way I should be
> researching doing this? My reasoning for multiple lines is to allow X
> number of simultaneous calls between sites.
=======================================================
Yes, that can be done. What you'd do is use IAX2 between the Asterisk
servers. I suggest you get a couple of old boxes and install Asterisk and
just start playing with it.
</snip>
Here's a URL I found with some useful information:
http://www.voip-info.org/wiki-Asterisk+legacy+integration
-Ron
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
