Here's a thought, Just to be sure you have the cables and everything pinned out correctly. Set the digital trunk card to a standard T1 in the Legend and set * as a standard T1 and try just plain tie lines between them. If this works then you know cards & cables are ok. As far as the message can not open D-channel, I saw that on my box when * could not sync up to the PRI. That ended up being the Telco had their config wrong.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of spectro Sent: Wednesday, November 17, 2004 2:53 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] start_pri: Unable to open D-channel 24 (No suchdevice or address) In my quest to determine why asterisk wont talk to our Merlin Legend I tried moving the D-Channel in zaptel to other position. But If I try putting it anything different than dchan=24 asterisk fails to load with "start_pri: "Unable to open D-channel 24 (No such device or address)" I wonder if there is a bug where it tries d-channel 24 regardless of dchan=x setting in zaptel.conf Now, If I set it to 24 I get the following warning: "No D-channels available! Using Primary on channel anyway 24!" This may explain why can't we get any calls through... any ideas? Victor Perez _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
