Bruce is right setting dtmfmode=inband solved the problem. ---quote--- If you are using G711, try setting dtmfmode=inband. We've had a lot of intermittent problems with * apparently loosing or ignoring DTMF when using rfc2833. It doesn't usually happen at the beginning of a call, but rather after a number of tones are sent, such as when picking up several voicemail messages or having a dialog with an IVR. When we changed to inband signalling, our problems went away.
Bruce Komito ---end quote---- Thank you Bruce #Joseph > I did some testing with some help, I shut down asterisk and enter in > SPA3000 Line1 default dial-plan: <#9,:>xx.<:@gw0> this gives me outside > line when I press "#9". So the connection goes through SPA3K unit and I > was able to access bank's automated system. So I would assume that * is > not configured correctly. My configuration is very simple. > > [globals] > ... > pstn-spa3k=10.0.0.150:5065 > > [outgoing] > ignorepat => 9 > exten => _9.,1,Dial(SIP/${EXTEN:[EMAIL PROTECTED],60,tr) > exten => _9.,2,Playback(invalid) > exten => _9.,3,Hangup _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users