Hi, I have two t100p cards installed. One card connected to the PSTN, the other card is hooked to the Definity PBX with a T1 cross over cable. The card connected to the PSTN works fine. The problem is with the card hooked up to the PBX. The light behind the card is green, but when I dial from this card I get an error. Its says it could start the D-Channel. Could someone help me out with this problem Here are the sections of my configuration files -------------------------------------------------------------------- ;; /etc/zaptel.com loadzone=us defaultzone=us span=1,0,0,esf,b8zs bchan=1-23 dchan=24
;; This is the problematic card loadzone=us defaultzone=us span=2,0,0,esf,b8zs bchan=25-47 dchan=48 --------------------------------------------------------------------- ;; /etc/asterisk/zapata.conf context = default switchtype = national signalling = pri_cpe group = 1 channel => 1-23 ;; The problematic card context = default switchtype = national overlapdial = yes signalling = pri_net group = 2 channel => 25-47 ------------------------------------------------------------------------ I tried with different options for the switchtype too. The signalling id definitely pri_net Would really be grateful for any help in this regard. Thanks and regards, - Ashish _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
