Hi all, Several months ago we built an * box with a quad-FXO tdm400p (REV e/f). >From the get-go, there has been a problem where occasionally (2-3 times a week) zaptel/* will not detect the ringing on a line. (The call will ring through to telco voicemail).
The problem is not specific to a single line or FXO port on the tdm400p. I have 2 theories: #1 - the ring voltage for some calls is below acceptable levels #2 - the tdm400p card is bad Assuming #1, can the zaptel driver be tweaked to be more sensitive to ringing? Any other ideas or experiences? Running asterisk/zaptel v1.0.2 Thank you, -- Ryan Courtnage Director & CTO Coalescent Systems Inc 403.244.8089 www.coalescentsystems.ca _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users