On Fri, 2004-12-03 at 10:48 -0500, Joshua M. Thompson wrote: > On Fri, 2004-12-03 at 08:39 -0500, Clint Guillot wrote: > > > Any ideas on why the T1 cards won't come out of red alarm, but work > > fine on the same machine booted to 2.4? > > It's quite possible you have an interrupt-related problem in 2.6 but not > in 2.4, since 2.6 tries to fully utilize ACPI now. You might want to try > booting with acpi=off and see if that fixes the situation.
While I don't have a T1 card, only an X100P and an original (no fxo) TDM400, I was following this thread. I've had months of trouble with the TDM all sorts of lockups etc. and over the last few days I've been trying to sort it out as I want the analog ports. The card always worked perfectly if the X100P was not in the machine. I've tried every combination of slots, I thing I could shout a number and the cards would move themselves now. Then I saw your post, rebooted with the above option and it seems to have sorted it out, 30 mins without a lock up is a record. -- Dave Cotton <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users