On Fri, 2004-12-03 at 15:52 -0500, [EMAIL PROTECTED] wrote: > All, > > I've got a problem here. We are using a Digium 4 T-1 board in our * server. > The T-1's are ISDN. The problem I'm having is that we have an ivr setup so > that when someone dials our DID it goes to the s extension and starts > playing the ivr which is fine, but if someone dials an extension for example > extension 200, it doesnt go to 200 it goes to extension 2. Seems like our > server doesn't even wait for the rest of the digits dialed. soon as it sees > 2 it goes straight to exten 2 and ignores the last two zeros therefore never > reaching extension 200. any suggestions? i've enclosed a snipet below.
> exten=>200,Goto(office,102,1);forward to 102 in office context How can you have 200, when below you define exten 2. > exten=>201,Goto(office,110,1);forward to 110 in office context Same here > exten=>1,1,Goto(office,102,1) > exten=>2,1,Goto(office,103,1) > exten=>3,1,Goto(office,104,1) > exten=>4,1,Goto(office,105,1) > exten=>5,1,Goto(office,106,1) > exten=>0,1,Goto(office,107,1) > exten=>t,1,Goto(office,108,1) Either you need to make your extensions start with a different number, or you need to not let people dial directly to a extension where you have an IVR menu present. For example, option 1 is move extention numbers from the 200 rang to the 800 range, the 8 doesn't appear used above. Or option 2 is to make an option 6,7,or 8 that jumps to a context where you can direct dial the extension numbers. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
