On Tue, 2004-12-07 at 16:34 -0600, Christopher L. Wade wrote: > Joseph wrote: > > Is there a way to ring selective line on multi-line phone. > > For example if I'm on the phone talking internally on line 1 and the > > calls comes-in the line 2 will automatically ring. > > The phone P104 allow extension to be assign each line. > > > > Is there a way to call certain line (example line 3) on multi-line phone > > instead of line 1 when the phone is not busy? > > > > For example the Sip phone P104 has 10-lines when I call this phone > > ext.12 line one rings, if line one is busy line 2 will ring. Is the a > > way I to dial straight line 2? > > > > use unique sip account for each line, then use the dialplan to pick what > line to dial. i use the same technique for having a 'Line' side line > button and a 'ICM' side line button on my Cisco 7940's. Calls from PSTN > come in on 'Line' side lines, internal intercom calls ring the 'ICM' lines. > > -Chris > I don't think so that is possible on that phone ACT P104. The phone allows to setup four SIP accounts but they are not linked to 10-line extensions. Though I'm not 100% sure. The phone has a feature called: "Line Key Settings" but what it does is just a wild guess. Manual (short guide) does not mention anything about it.
The manual the came with the phone is outdated and ACT is not reponding to customer emails. -- #Joseph _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users