At 06:29 PM 12/9/04, you wrote:
www.grandstream.com/BETATEST
----- Original Message -----
From: "Mark Willis" <[EMAIL PROTECTED]>
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
<[EMAIL PROTECTED]>
Sent: Thursday, December 09, 2004 11:36 PM
Subject: RE: [Asterisk-Users] BT-100 Transfer!!
> I never could get attended transfer to work with the BT-100 on 1.0.5.16.
Where
> did you get 1.0.5.18? It's not anywhere obvious on Grandstream's web site.
>
> Mark
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Craig Guy
> Sent: Thursday, December 09, 2004 02:56
> To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial
> Discussion
> Subject: Re: [Asterisk-Users] BT-100 Transfer!!
>
> You need firmware 1.0.5.16 (Broken message button for voicemail) or
1.0.5.18
> (Still in Beta, phone display '403' error about once per hour for 10
seconds
> or so. In order to use attended transfer you place the caller on hold by
> pressing the flash button and then dial the third person. Once you hang
up
> the caller is transferred to the third person.
>
> Craig
Transfer feature is not enabled in 1.0.5.18 for asterisk, it is for Nortel
greg
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users