That works for me too, just not obvious. Pity Conference doesn't work the same way.
And 1.0.5.18 fixed the Message button, thanks to those who suggested the location. Mark -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Goddard Sent: Friday, December 10, 2004 08:10 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] BT-100 Transfer!! On Friday 10 December 2004 13:53, Greg - Cirelle Enterprises wrote: > At 07:05 AM 12/10/04, you wrote: > >greg wrote: > >>Transfer feature is not enabled in 1.0.5.18 for asterisk, it is for > >> Nortel > > > >Diego Aguirre wrote: > >I use atendent transfer in Asterisk!!! > > ok, the # extension key combo > > too bad the 3 buttons cannot be programmed to emulate > the functions to make it work. i.e. the transfer button > to send the key code of the # key, etc... same with > conference and flash. It does work. Make sure on configuration page, you set "send flash event" to be NO, then pressing flash will not send any dtmf signal, but try to open another session. A talk to B, B press flash and hear dial tone, B dial C an talk to C. B press transfer to let A talk to C. then B hangs up. B _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
