On Fri, 10 Dec 2004 14:46:26 -0800, Jose Hernandez <[EMAIL PROTECTED]> wrote: > > If I reboot and immediately do a "ztcfg -vv" I get the well > > known "Unable to open master device '/dev/zap/ctl'. If I then do > > a "modprobe wcfxo" this error disappears and Asterisk runs fine. > > > > Asterisk runs fine as long as I do a modprobe wcfxo after each > >> reboot, prior to running Asterisk. I can make and receive calls > > through the x100p. I would just like to solve the error issue. Thanks. > > > > It seems like you are using udev check services if you are not sure. > > Try making this change; > "9-Edit the file /etc/init.d/zaptel and replace all: > insmod with modprobe > and rmmod with modprobe -r" > > It is in http://www.voip-info.org/tiki-index.php?page=Linux%20Fedora > > - Jose
Thanks, but there is no zaptel file in /etc/init.d/ I'm using White Box Linux, which is derived from RHEL 3. Kernel is 2.4.x I'm still not sure whether this system uses udev or not, but * works as long as I do a "modprobe wcfxo" prior to starting Asterisk. My goal right now is simply trying to get that module loaded at boot time on this system. -- Lee _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
