Noah Miller wrote:
Here are my configs for the TE410P: zaptel.conf: span=1,1,0,esf,b8zs
Well, you say you have a green light, but this should be:
span=1,0,0,esf,b8zs
because you want your card to derive the clock from the Verizon-supplied end of the circuit.
bchan=1-23 dchan=24
zapata.conf: switchtype = national context = incoming signalling = pri_cpe group = 1 channel => 1-23
This all looks reasonable at first glance. Do you know for sure that Verizon has configured your PRI for NI-2 signaling? What does "pri show span" say on your Asterisk console?
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
