Thank you! I will try again tomarow
On Tue, 2004-12-14 at 14:05 -0500, Leif Madsen wrote: > On Tue, 14 Dec 2004 03:22:47 -0600, Justin Carlson <[EMAIL PROTECTED]> wrote: > > If anyone has a working unidencomm.txt and uniden<MACOFPHONE.txt file Could > > you please post it. > > Hi Justin, > > I am using the UIP200 here at home. Find pasted my configuration > files. Note that I haven't tested everything in the file, but basic > functionality (inbound and outbound calling) definately works. As > does the MWI. This is based on the 4.59a firmware. Different > firmwares may have different configurations? > > uniden<MACOFPHONE>.txt > ---------------------- > > # UIP200 Mass Configuration System Mac-based File > # Notes: Lines start with '#' are comments > # To leave a field value unchanged (as saved on local phone), leave > value to blank. > # To disable a field, use '-' as value > # MAXIMUM FILE SIZE IS 10KB > # Current Limitation: No spaces allowed for a setting's value > # Version: BS.459a > > > # Firmware. The items listed in this Firmware section must be in this order. > # FirmwareVersion and FirmwareFileName only used if AutoFirmwareUpdate is YES > # FimrwareFileName only used if FirmwareVersion differ from firmware > ver in Flash > AutoFirmwareUpdate YES #choices are YES and NO > FirmwareFileName uip200_459aenc.pac > FirmwareVersion BS4.59a > > > # Sip Settings > MyLcdDisplay 1001 > MyDialNumber 1001 > DisplayName Apartment 1406 > UserNameForProxy 1001 > PasswordForProxy 1001 > UserNameForRegistrar 1001 > PasswordForRegistrar 1001 > > # Programmable Keys. Key functionality must go before key values. > ProgrammableKey1 OneTouchDial > ProgrammableKey2 OneTouchDial > ProgrammableKey3 OneTouchDial > ProgrammableKey4 OneTouchDial > ProgrammableKey5 TwoTouchDial > ProgrammableKey6 DoNotDisturb > ProgrammableKey7 VMA > ProgrammableKey8 Mute > > # One and Two-touch keys. Must go after Programmable keys > functionality definitions. > # Refer to Programmable and Fixed Function Keys for usage guide > # OneTouchKeyX value is used ONLY when ProgrammableKeyX is OneTouchDial > OneTouchKey1 1000 > OneTouchKey2 > OneTouchKey3 > OneTouchKey4 1601 > OneTouchKey5 2001 > OneTouchKey6 > OneTouchKey7 8500 > OneTouchKey8 > > TwoTouchDigit0 > TwoTouchDigit1 > TwoTouchDigit2 > TwoTouchDigit3 > TwoTouchDigit4 > TwoTouchDigit5 > TwoTouchDigit6 > TwoTouchDigit7 > TwoTouchDigit8 > TwoTouchDigit9 > > # Hotline and vmwi numbers --Must be placed after OneTouchDial's > HotLineNumber - > VmaDirectCallNo 8500 #value associating with VMA Programmable key. > VmwiLampIndicator Enable > > TimeDisplay Enable > > #end of file > > unidencom.txt > ------------- > > # UIP200 Mass Configuration System Generic File > # Notes: > # 1. Lines start with '#' are comments > # 2. To leave a field value unchanged (as saved on local phone), leave > value to blank. > # 3. To set a field's value to empty, use '-' as value. > # 4. To NOT overwrite user local settings of: programmable key, > one/two touch keys, VMA > # number, VMWILampIndicator, set "OverwriteLocalSetting = NO". > Default is "YES". This > # key will ALSO affect whether or not THESE settings in > uniden<MAC>.txt be used. > # 5. Any duplicate parameters exist in both unidencom.txt and > uniden<MAC>.txt, MAC settings > # will be used. > # MAXIMUM FILE SIZE IS 10KB > # Current Limitation: No spaces allowed for a setting's value > # Version: 4.59a > > > #Overwrite user local settings of programmable keys, one/two touch > keys, vma settings > #If set to no, these current settings on the phone will not be overwritten. > OverwriteLocalSettings YES # must be placed > on top of config file > > # Sip Settings --If only ProxyServer needed, set OutboundProxy1/Port > same as ProxyServer/Port > ProxyServer 192.168.1.1 # can be an IP > address or FDQN > ProxyServerPort 0 # 0 to use default port > OutboundProxy1 192.168.1.1 # can be an IP > address or FQDN > OutboundProxy1Port 0 # enter a port > number or 0 for default (5060) > Registrar1 192.168.1.1 # can be an IP > address or FQDN > Registrar1Port 0 # enter a port > number or 0 for default (5060) > RegisterExpireSec 3600 > RegisterRetrySec 90 > Q_Param 50 > RegisterExpireLimitPercent 10 > FailoverRetrySec 8 > SipPort 5060 > SRVRecordName - #_sip._udp.unisip.com > # options are ON or OFF > SessionTimerSupport ON > # options are ON or OFF > SessionTimerRefresher ON > SessionTimerMin 60 > TimerInterval0 300 > TimerInterval1 150 > > > # Audio Settings > G711MuTxPacketLength 20 > G711MuJitterBufferLength 10 > G711MuJitterBufferMax 200 > G711ATxPacketLength 20 > G711AJitterBufferLength 10 > G711AJitterBufferMax 200 > G729TxPacketLength 20 > G729JitterBufferLength 10 > G729JitterBufferMax 200 > LongHoldAlertPeriod 360 > > # options are ON and OFF > DiffServMode OFF > DefaultDiffServParam 192 > RTPDiffServParam 160 > # options are TRUNKMODE, CASCADEMODE, DISABLE > VlanMode DISABLE > VlanID 1 > PcVlanID 2 > #TftpAddress 10.1.0.17 # save to phone and > used next time if not offered from DHCP > > > > > TimeZone -5 > # choices are YES and NO > EnableDST YES > # choices are YES and NO > EnableSNTP yes > # SNTP Server IP address > SntpServerIP 192.168.1.1 > # Time period (in seconds) before recontacting SNTP server > SntpRetrySec 1800 > > > # preferred codec are listed from most preferred, separated by commas > and NO space > PreferredCodec g711u,g711a,g729 > # choices are English, Spanish, and French > Language English > #choices are Enable and Disable > CallWaiting Enable # > EmergencyProxyPrefix ** > > > #Admin password must be numeric. Max is 6 digits. Format: > oldpassword/newpassword > AdminPassword 1234/1111 > > #end_of_file > > sip.conf entry > -------------- > > [1001] > ; uniden uip200 > type=friend > username=1001 > secret=1001 > qualify=yes > nat=never > host=dynamic > canreinvite=no > context=administrator > dtmfmode=rfc2833 > ;disallow=all > ;allow=ulaw > mailbox=1001 > > HTH, > Leif Madsen. > http://www.leifmadsen.com > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users