On Sunday 19 December 2004 06:31, Wilson Pickett wrote: > > Is it possible to send the incoming PSTN caller ID to a Grandstream > > Budge Tone-100 SIP phone? I've configured the extensions.conf file > > and the log is > > As Eric notes, the BT100 phones won't show letters. If a call comes > in without CID, asterisk sends a string like "Asterisk call" which > the BT will try to display as some giberish so I have setcallerid to > "000" when this happens. I'd recommend using setcallerid(1234567890) > (or any number) to test the phone, which should display that. If > callerid does come in from PSTN, it should just make through as he > said.
I'm having the same issue as David, and forcing the CallerID with SetCallerID() doesn't work - it still only shows the extension of the phone I'm calling. (Yes, I've checked the CDR and also done a show channel on the phone while ringing - the Caller ID is reset properly I think I have the solution -- I had the fromuser= variable set, which is what Asterisk uses to force CallerID as when it's making calls out to the Grandstream. Is that set, David? If so, unset it, and you should be fine. --mec _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users