I am having problems getting incoming caller id to work on a Telstra
Onramp 10.
I have changed "/DEFAULT_CIDRINGS 2"/
Is there something i'm missing ?
My Cisco 7960 just shows "asterisk"
Thanks,
Nathan
[zapata.conf]
context=incoming
usecallingpres=yes
relaxdtmf=no
rxgain=0.0
txgain=0.0
busydetect=no
pridialplan=local
usecallerid=yes
callerid=asreceived
hidecallerid=no
callwaiting=no
callwaitingcallerid=no
threewaycalling=no
transfer=no
cancallforward=no
callreturn=no
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
adsi=no
callprogress=no
switchtype => euroisdn
signalling => pri_cpe
callgroup => 1
group => 1
immediate => yes
channel => 1-10
[extensions.conf]
[incoming]
exten => s,1,NoOp
exten => s,2,Wait(1)
exten => s,3,Answer
exten => s,4,DigitTimeout(5)
;temp addition
exten => s,6,Macro(reception,${INCOMING_DIAL})
linux*CLI> show channel Zap/2-1
-- General --
Name: Zap/2-1
Type: Zap
UniqueID: 1103473308.3
Caller ID: (N/A)
DNID Digits: (N/A)
State: Up (6)
Rings: 1
NativeFormat: 72
WriteFormat: 8
ReadFormat: 8
1st File Descriptor: 12
Frames in: 1224
Frames out: 1986
Time to Hangup: 0
Elapsed Time: 0h0m24s
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
