Is it possible to use the sms_app over zap without the .call file? I tried the example with zap behind a hipath. Reciving a SMS works fine, but if i send an SMS using the .call file i recive an SMS without a message. Why didn't you use the lines? Application: SMS Data: default,,<MOBILE NUMBER>,<MESSAGE TO SEND> You didn't need the smsdial context that way!!!
-----Ursprüngliche Nachricht----- Von: Stefan Reuter [mailto:[EMAIL PROTECTED] Gesendet: Montag, 20. Dezember 2004 08:41 An: Asterisk Users Mailing List - Non-Commercial Discussion Betreff: Re: [Asterisk-Users] SMS - how to send one > I realize that the most interesting aspect for some is to talk back > and forth between phone and asterisk on the local server which is > "nice" too. yes i almost forgot about that one. app_sms can also act as a message center itself: so if you connect some sms capable fixed line phone to asterisk you can send sms messages to and receive messages from that phone. > I second the request for some config info. I've read everything I > could find on this and it wasn't enough. I'm still missing some basic > concept. ok. the best resource is probably the wiki http://www.voip-info.org/tiki-index.php?page=Asterisk%20cmd%20Sms - but i am sure you already got that. I am using asterisk-1.0.2 with the following config: extensions.conf: [capi-in] exten => s/01930100,1,NoOp(incoming sms ${CALLERIDNUM}) exten => s/01930100,2,Answer exten => s/01930100,3,Wait(2) exten => s/01930100,4,SMS(default,a) exten => s/01930100,5,Hangup ... [smsdial] exten => _X.,1,SMS(default,,${EXTEN},${MSG}) exten => _X.,2,SMS(default) exten => _X.,3,Hangup exten => h,1,Hangup The [capi-in] context is the context where i send all my incoming calls from pots to. Based on the callerid (01930100 is the callerid the t-com message center sends, see list in wiki) incoming sms messages are detected and send to app_sms in answer mode. (Note the wait(2) which is really needed in order to allow the message center to catch up) The [smsdial] context is used for sending outgoing sms messages. To send messages i am using a small perl script that places a .call file into /var/spool/asterisk/outgoing with the following content: Channel: CAPI/<MY MSN>:b<NUMBER OF MESSAGE CENTER, i.e. 0193010> MaxRetries: 2 RetryTime: 60 WaitTime: 30 Context: smsdial Extension: <MOBILE NUMBER> Priority: 1 SetVar: MSG=<MESSAGE TO SEND> You will find the perl script attached but be warned it is not ready for production as it doesn't do any input validation! > I will be asking French Telecom to enable SMS on our fixed line today > (and we'll see if that stops the nice lady from reading "hello world" > with a French accent) Fixed line SMS has been advertised for at least > a year here. Thats what i did here, too. So german telecom knows i dont like that lady, but any other mobile providers still "talk" to me. stefan _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users