At 10:37 AM 12/23/04, you wrote:
Even though they make the cards and advertise that they support data modes,
digium won't support data mode on the $500 card they sold to me, so I must
turn to the list.
Has anyone configured a T100P to use a T1 strictly as bandwidth? Is there a
HOWTO somewhere? Wiki has nothing I could find. I've got plently of public
IPs I can assign to it but don't know how.
Thanks,
Matthew
I've gone round and round with them on this.
From what I understand, the card will only work with a pri type t1 not
a data line unless you have a device that will emulate that configuration.
(same with the sangoma card by the way) only sangoma will tell you that.
If you are thinking of a return on this card, They will tell you the loopback
works so the card is ok, no return.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
