I tried to configure a TE110XP using HDLC (mainly to see if it worked) I called the guys at Digium because HDLC support is not natively compiled, they told me that HDLC was not covered in the free support provided with the card, I had to rebuildl the kernel but as I had not that much time available to play with the Cisco swith which was the E1 connection I had to end the test there, however there is some info in:
http://www.voip-info.org/tiki-index.php?page=Asterisk%20Data%20Configuration I also read some of the posts in the lists like http://lists.digium.com/pipermail/asterisk-users/2004-May/047704.html http://lists.digium.com/pipermail/asterisk-dev/2003-May/000545.html hope this helps... bye, M. ----- Original Message ----- From: "Matthew Boehm" <[EMAIL PROTECTED]> To: <asterisk-users@lists.digium.com> Sent: Thursday, December 23, 2004 12:37 PM Subject: [Asterisk-Users] Fw: [digium.com #12961] T100P as bandwidth > Even though they make the cards and advertise that they support data modes, > digium won't support data mode on the $500 card they sold to me, so I must > turn to the list. > > Has anyone configured a T100P to use a T1 strictly as bandwidth? Is there a > HOWTO somewhere? Wiki has nothing I could find. I've got plently of public > IPs I can assign to it but don't know how. > > Thanks, > Matthew > > ----- Original Message ----- > From: "Matthew A. Nicholson via RT" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, December 23, 2004 10:38 AM > Subject: [digium.com #12961] T100P as bandwidth > > > > Yes the hardware, and our drivers suppport both voice and data modes, > > but because of the nature of the configuration we do not support it. > > Configuring one of our T1 cards for data mode often requires a kernel > > recompile, and extensive network device configuration. Here at Digium > > our speciality is telephony not networking, this is why we do not > > support the data mode of our hardware. > > > > > [EMAIL PROTECTED] - Wed Dec 22 17:16:29 2004]: > > > > > > I dont mean to sound like a jerk but it says quite clearly on your > website > > > (http://www.digium.com/index.php?menu=wildcard_t100p) that this card > does > > > both Voice and Data. Why would you guys tell me that the card supports > > data > > > but not support data config yourself? They are your cards right? > > > > > > Thanks, > > > Matthew > > > > > > > -- > > Matthew A. Nicholson > > Digium > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
