-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of TC Sent: Thursday, December 23, 2004 1:29 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] RedAlarm (t100p - Adtran Total Access 750)
> Why would you say channel banks should sync with asterisk box ? > I would advoate that the highest quality timing source should be the souce > Of timing, ie which source has the most accurate crystal or what source > has the highest stratum rating ? Thanks to everyone who has responded to my e-mail. The documentation doesn't really explain it that well. This is what I have picked up from the conversation: Using these settings, The T100P would get Clock Sync from itself. It would use its own timing. span=1,0,0,esf,b8zs Using these settings, the Channel Bank will receive clock sync from the t100p. span=1,1,0,esf,b8zs Sorry for my stupidity, and it seems as this thread always comes up about once a year, however it really hasn't been fully explained. It just seems as if there is only two methods of operation. Either don't use the span as a timing source (e.g. the CB and t100P provide their own timing, or the other method, the T100P provides clock sync.) Is it possible for the Channel Bank to retrieve clock sync from T100P? Thanks, - Brent _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users