I just got the new developer TDM11B, but I got some problems with it. Since Digium is on vacation, I figured I'd ask here first:
I installed the TDM11B, but have not attached any phone lines, yet. I just want to work with the demo over SIP first. But here's the story, after installing the card on a Dell SC420 (further identifying info comes from dmesg): FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.53GHz (2527.01-MHz 686-class CPU) when init runs /usr/local/etc/rc.d/zaptel.sh I get the following info: Zapata Telephony Interface Registered on major 196 FXS device: vendor=e159 device=1 subvendor=b100 wcfxs0: <Wildcard TDM400P REV E/F> port 0xdc00-0xdcff mem 0xdfaff000-0xdfafffff irq 18 at device 2.0 on pci4 FXS Attach for wcfxs0: deviceID : 0xe159 wcfxs0: [GIANT-LOCKED] Freshmaker version: 71 Freshmaker passed register test Module 0: Not installed Module 1: Not installed Module 2: Not installed Module 3: Not installed Freed a Wildcard FXS detach! We failed: 5 device_attach: wcfxs0 attach returned 5 I don't get why it says we failed. I thought maybe it was the order that the modules are loaded (currently they are: zaptel, wcfxo, wcfxs) but I get the same error if I reverse wcfxo and wcfxs. I get the following devices created in /dev/zap, but none of them are configured (i.e. if I `cat /dev/zap/timer` I get "device not configured"). crw-rw-r-- 1 root wheel 230, 254 Dec 25 12:46 channel crw-rw-r-- 1 root wheel 230, 0 Dec 25 12:46 ctl crw-rw-r-- 1 root wheel 230, 255 Dec 25 12:46 pseudo crw-rw-r-- 1 root wheel 230, 253 Dec 25 12:46 timer I can make asterisk run, and I can connect to it using a software SIP phone. I can even hear the demo, but it is waaaaayyyy choppy. So I figure that the choppiness will diminish once I can get the FXS module to load. So ... how do I get wcfxs to load? Thanks! lane _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users