Thanx for the tip but I had already copied the init script over myself and eventually even tried to hack it.
What I *should* have posted before was that when the init script runs it didn't/doesn't work...that is until I run the ztcfg manually. I ended up adding this to the rc.local to make it work through a reboot. ztcfg /etc/init.d/asterisk restart Jeff ----- Original Message ----- From: "C F" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Tuesday, December 28, 2004 11:16 AM Subject: Re: [Asterisk-Users] FC3, TDM11B (DEVPCI) and asterisk > Do a make config in /usr/src/zaptel this will take care of the init.d script. > > > On Tue, 28 Dec 2004 04:48:50 -0500, Jeff <[EMAIL PROTECTED]> wrote: > > Thanks for the response but it turned out to be two tiered... > > > > I had to run ztcfg manually because it was not run in the init script. > > > > I was able to get it to work on another motherboard. (using the technique > > above) > > > > After two days a fiddling, compiling, etc I started dreaming about these > > files ;-) > > > > Great product! > > > > Jeff > > ----- Original Message ----- > > From: "C F" <[EMAIL PROTECTED]> > > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > > <asterisk-users@lists.digium.com> > > Sent: Monday, December 27, 2004 11:44 PM > > Subject: Re: [Asterisk-Users] FC3, TDM11B (DEVPCI) and asterisk > > > > > Yes I do. Post the zapata.conf, zaptel.conf and the extensions.conf, > > > i'll see what I can do. > > > > > > > > > On Fri, 24 Dec 2004 18:49:27 -0500, Jeff <[EMAIL PROTECTED]> wrote: > > > > Hey folks; > > > > > > > > I am a old Dialogic telephony hack and have tried asterisk a while back > > on > > > > a laptop with the OSS module and I liked what I saw. I recently came > > across > > > > some info regarding asterisk 1.0 and thought I should give it a go. I > > used a > > > > AMD K7 MB, compiled the binaries without a real problem and realized > > that I > > > > might have a sound card issue because I couldn't hear the messages but > > the > > > > demo worked otherwise. I noticed that my sound card was having a problem > > so > > > > I abandoned that approach but I'm not finished just yet. > > > > > > > > I then decided to get a DEV kit and give it a real go. I compiled the > > > > binaries (zaptel and asterisk) without incident and I was able to start > > the > > > > drivers. I have green lights on port 1 and 4 and I understand that port > > 1 is > > > > the station port (for a 2500 set regular phone set?) and that port 4 is > > able > > > > to connect to a regular 1FL (simple pots line). > > > > > > > > I used some 'examples' from the Digium site and when that didn't work I > > used > > > > a few from a link I found > > > > (http://iheavy.com/modules.php?op=modload&name=News&file=article&sid=35) > > but > > > > I have no dialtone on the phone and it won't pickup (or write ANY logs) > > when > > > > I call the line. > > > > > > > > My question(s) for the list is/are; > > > > > > > > Does anyone have a working asterisk system using zaptel TDM cards on FC3 > > > > with kernel 2.6.9-1.681_FC3 and if so, is there something that I am > > > > missing? > > > > > > > > Any tips would be appreciated and thanx in advance. > > > > > > > > Jeff > > > > > > > > _______________________________________________ > > > > Asterisk-Users mailing list > > > > Asterisk-Users@lists.digium.com > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > To UNSUBSCRIBE or update options visit: > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > Asterisk-Users@lists.digium.com > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users