Dear list, I am starting to setup an asterisk pbx, using a Fritz ISDN card through chan_capi (0.3.5). The underlying OS is SUSE 9.2; I installed asterisk with the RPMs supplied on the DVD.
While I can dial out (I had successful outside calls), through the ISDN card, so far I could not answer a phone call on the card. My capi.conf file is quite fantasyless: ; ; CAPI config ; ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=221591030 incomingmsn=221591030 controller=1 devices=2 softdtmf=1 callgroup=1 context=from-chan_capi ;accountcode= ;echosquelch=1 ;echocancel=yes ;echotail=64 ;deflect=02-fastweb !! Now if I try from one SIP extension to call my self (on 0221591030) , I can obtain the 'ringing' of the office number. But I was not able to see Asterisk answering the call. There is a second ISDN physical phone connected, as well as a Zyxel ISDN router (with two analog phones attached). Everything rings but the internal SIP extension... After some fiddling I did activate capi debugging; here is what prints out on the CLI during an attempt: gamma-stargate*CLI> capi info Contr1: 2 B channels total, 2 B channels free. gamma-stargate*CLI> reload Jan 5 16:52:40 NOTICE[1110690736]: indications.c:397 ast_unregister_indication_country: Removed default indication country 'it' -- CONNECT_CONF ID=002 #0x0041 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 -- INFO_IND ID=002 #0x17cc LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x800d InfoElement = default -- INFO_IND ID=002 #0x17cd LEN=0016 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x18 InfoElement = <89> -- CONNECT_IND ID=002 #0x17ce LEN=0049 Controller/PLCI/NCCI = 0x201 CIPValue = 0x10 CalledPartyNumber = <a1>221591030 CallingPartyNumber = <21 81>221591030 CalledPartySubaddress = default CallingPartySubaddress = default BC = <80 90 a3> LLC = default HLC = <91 81> AdditionalInfo = default Jan 5 16:52:57 NOTICE[1088080816]: chan_capi.c:1932 capi_handle_msg: CONNECT_IND ID=002 #0x17ce LEN=0049 Controller/PLCI/NCCI = 0x201 CIPValue = 0x10 CalledPartyNumber = <a1>221591030 CallingPartyNumber = <21 81>221591030 CalledPartySubaddress = default CallingPartySubaddress = default BC = <80 90 a3> LLC = default HLC = <91 81> AdditionalInfo = default Jan 5 16:52:57 ERROR[1088080816]: chan_capi.c:2051 capi_handle_msg: did not find device for msn = 221591030 -- INFO_IND ID=002 #0x17cf LEN=0025 Controller/PLCI/NCCI = 0x201 InfoNumber = 0x70 InfoElement = <a1>221591030 Jan 5 16:52:57 ERROR[1088080816]: chan_capi.c:1198 find_pipe: unable to find a pipe for PLCI = 0x201 MN = 0x17cf Jan 5 16:52:57 NOTICE[1088080816]: chan_capi.c:1302 pipe_msg: INFO_IND ID=002 #0x17cf LEN=0025 Controller/PLCI/NCCI = 0x201 InfoNumber = 0x70 InfoElement = <a1>221591030 -- INFO_IND ID=002 #0x17d0 LEN=0016 Controller/PLCI/NCCI = 0x201 InfoNumber = 0x18 InfoElement = <8a> Jan 5 16:52:57 ERROR[1088080816]: chan_capi.c:1198 find_pipe: unable to find a pipe for PLCI = 0x201 MN = 0x17d0 Jan 5 16:52:57 NOTICE[1088080816]: chan_capi.c:1302 pipe_msg: INFO_IND ID=002 #0x17d0 LEN=0016 Controller/PLCI/NCCI = 0x201 InfoNumber = 0x18 InfoElement = <8a> -- DISCONNECT_IND ID=002 #0x17d3 LEN=0014 Controller/PLCI/NCCI = 0x201 Reason = 0x0 Jan 5 16:52:57 ERROR[1088080816]: chan_capi.c:1198 find_pipe: unable to find a pipe for PLCI = 0x201 MN = 0x17d3 -- INFO_IND ID=002 #0x17d4 LEN=0015 Controller/PLCI/NCCI = 0x101 InfoNumber = 0x8001 InfoElement = default -- DISCONNECT_CONF ID=002 #0x0042 LEN=0014 Controller/PLCI/NCCI = 0x101 Info = 0x0 -- DISCONNECT_IND ID=002 #0x17d5 LEN=0014 Controller/PLCI/NCCI = 0x101 Reason = 0x3400 gamma-stargate*CLI> Unfortunately I do not understand where the problem is. The context inside extension.conf that I would like to obtain the call is the following: ; *** INBOUND CONTEXT: DIAL INTERNAL PHONES [from-chan_capi] ; reach the internal dialplan context! include => incoming include => nba_plan ; *** INCOMING CONTEXT: FROM FRITZ! CARD [incoming] ; context to receive calls from chapi_chan; use NB&A Dial Plan exten => s,1,Answer() exten => s,2,Dial(SIP/2000,20) exten => s,3,Hangup() Any help appreciated, thanks, Aldo _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users