You're right it works, but how about receiving calls, how can you register so the FXO gateways knows where to send the calls? Or I just setup the FXO gateway with the IP address of the * box?
Humberto Aicardi -----Mensagem original----- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de Adi Linden Enviada em: Wednesday, January 05, 2005 9:28 PM Para: Asterisk Users Mailing List - Non-Commercial Discussion Assunto: Re: [Asterisk-Users] chan_oh323 & gatekeeper > Until now I have used only SIP & IAX2 with success and understand > them pretty well. The point is that someone has asked me to configure an * > box for them, the problem is that they want to use H.323. I have already > compiled and tested the chan_oh323 with asterisk and works. The problem is > that the tests need a gatekeeper, my question is: Do I need always need a > gatekeeper? Or my FXO H.323 gateway can register with * ? I have this in my extensions.conf. The oh323.conf has gatekeeper disabled and nothing else specific to the 192.168.99.83. Works just fine to place calls to a Cisco fxo gateway. exten => s,3,Dial(OH323/[EMAIL PROTECTED]) ; H.323 Protocol Adi _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users