Dear All ~
I have * setup & running ok (with two Wildcard X100P's to PSTN). I also have two analog phones connected into same through a SIPURA 2000. These work fine, except that when I call out through PSTN & try to send DTMF tones to (say) a remote PBX to dial an extension, the gain seems to go wild (high), and the DTMF tones are not recognized at the other end.
I tried setting the SIP2000 to use inband dtmfmode (as opposed to auto), and likewise in sip.conf, but no success.
btw, I've also set relaxdtmf=yes in zapata.conf since inbound calls sometimes seem to have trouble dialling extensions.
A soft IAX phone (e.g. DIAXPhone) works ok, so I suspect my SIP2000/sip.conf setup, but can't see what I'm doing wrong.
You can only use inband DTMF when using the ulaw or alaw codec. If you use any other codec you need to use Out of Band DTMF, i.e. INFO or RFC2833. This is not an Asterisk issue. Codecs discort DTMF. Both Asterisk and the phone should be set to the same DTMF mode.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users