Ah, ok.. It is a bit clearer now. I'll give it a try.
Thanks -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rich Adamson Sent: Monday, January 10, 2005 12:36 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Asterisk Demo > I need to setup a demo for asterisk and need some help here please. > The demo is connecting to Asterisk a Cisco 7970 SIP (ver. &.0) and a SIP > client on HP iPAQ via a wireless hotspot. I need to configure both > with the same extension with a shared line like in Cisco CallManager. This > way if the extension is called both iPAQ and the IP phone ring and the > user gets to pick up using either. > You will not be able to configure both phones with the same extension. The one that registers last will be the only one that will function, until the second decides to register. Then the first one will fail and the second one will work. Give each phone its own extension and then include both extension numbers within the Dial command (as someone already commented on). Something like: PHONE3=SIP/3010 PHONE4=SIP/3011 exten => 100,1,Dial(${PHONE3}&${PHONE4},20) Both phones will ring, but the first one that answers the call will get the call. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users