Hi! Both of your answers helped to some extent thank you. The rest remains up to me to play a bit with the configurations.
thanks, Zoltan Quoting Niksa Baldun <[EMAIL PROTECTED]>: > Hello, > > I am a Kirk IP600 user too, and I had partial success in getting it to > work with chan_sccp. I changed the line 133 in chan_sccp.c to the following: > > if ( (!s->device) && (mid != RegisterMessage && mid != AlarmMessage && > mid != KeepAliveMessage && mid != IpPortMessage)) { > > And then I was able to register IP600 hansets, but only to find there > are other problems. I am currently communicating with Kirk support in > order to see what is happening. When I have more info I will send it to you. > > Niksa > > > Julien Goodwin wrote: > > >On Thu, Jan 13, 2005 at 01:09:54PM +0200, Kelemen Zoltan arranged a set of > bits into the following: > > > > > >>Hi! > >> > >>I have two, not too related questions: > >>- the probably simpler one: if anyone can help me out using a Cisco > >>7905G with chan_sccp? I did already managed to get it working with a SIP > >>image, I'd just like to see it work with this one as well. It's probably > >>something I screw up with the configuration, as the phone registers, > >>only I don't get any lines with it, although I have it configured it to > >>auto-login. > >> > >>excerpt from my sccp.conf > >>-----snip------ > >> > >>[SEP001193C2ABFC] > >>device=SEP001193C2ABFC > >>type=7905 > >>autologin= c7905 > >>callerid="cisco 7905" > >> > >>[c7905] > >>line = 1045 > >> > >>-----snip------ > >>(I have a default extension set for the entire sccp.conf, so that > >>shouldnt(?) be the issue) > >> > >> > > > >That's the contents of a skinny config file, the two have different > >formats. Here's what I use for one of my phones: > >---snip--- > >[SEP003080628DD7] > >type = 12 > >autologin = phone4 > >description = Cisco Phone 4 > > > >[phone4] > >id = 4005 > >pin = 1237 > >label = Phone4 > >description = Phone4 > >callwaiting = 0 > >mailbox = 4005 > >cid_num = 4005 > >cid_name = Cisco Phone 4 > >--- endsnip --- > >And I call with Dial(SCCP/phone4) > > > > > >>I have the XMLDefaultConf in place, tftp server running, although that's > >>about it. I would appreciate any pointers in this general direction. > >>What am I missing? :) > >> > >> > >See above, copy the format, just use your own data. > > > > > > > >>The second, much more thorny question is: did anyone had any success on > >>using a KIRK IP600 with asterisk? > >>- The only thing I really found on the net were a couple of emails on > >>this list, that didn't get me too far. > >>The KIRK IP600 is a DECT (cordless) to IP solution, with support for > >>SCCP and H323. The SCCP interface was designed specifically to be > >>interoperable with Cisco Call Manager, and it emulates a 7940 for each > >>of the phones it has registered. > >> > >>With chan_skinny I managed to register the phones, they've got tone, but > >>they would not ring out. > >>With chan_sccp I had no luck at all, I'm getting the following messages > >>on the CLI: > >>== >> Got message AlarmMessage > >>== >> Got message RegisterMessage > >>== Sending Packet Type RegisterRejectMessage (37 bytes) > >> > >>Note: the two modules were NOT tried at once. > >> > >>So far I didn't have time to check it out with h323, but If anyone had > >>it working that way, I'm interested in that one as well. > >> > >> > > > >H323 is probably the one to try, but fix your sccp config like the above > >(a compile fix for asterisk CVS has just been committed) and let me know > >what you get (in debug mode very verbose). If anyone in Australia has one > >or is able to arrange a loan for a few days I'd probably be able to make > >them work, but without being able to hack on the code with the device it > >makes it quite hard. > > > >I'm just writing some code to see if I can fix the "client sent > >IPPortMessage without first registering" that someone got before, if > >anyone is able to duplicate that drop me a line and I'll see if my patch > >works against it. > > > >Thanks, > >Julien Goodwin > >chan_sccp developer > > > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >Asterisk-Users mailing list > >Asterisk-Users@lists.digium.com > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users