I've logged a support call with digium and with our reseller here in Australia (ATP), but haven't had much of an answer from either so far.
Does anyone know if the PCI interrupts configured to be edge triggered rather than level triggered or vice versa could have an effect on the TE410P's and does anyone know what method is used within the DL380 G4s? I'm guessing probably level because the chipset in them is so new, and maybe the PCI interface on the TE410P's expects edge triggering (could this be why they don't share interrupts very well?), so it doesn't generate interrupts properly? - I could be wrong and barking up the wrong tree completely here.... Does anyone have any ideas on this? This is the question I am thinking of asking HP support (What irq trigger method is used in the DL380 G4's - I can't find an option for this particular setting in the G4 BIOS.), because I've tried everything else I can think of to get the cards working (Different Linux Versions & Kernel Versions, Different Zaptel Driver Versions, Putting the Card in Different Slots, Changing BIOS Settings etc). Josh -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Hanselman Sent: Friday, 14 January 2005 7:24 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Has anyone also logged a support call with Digium, it has to be either the card, Linux or the Zaptel drivers. Steve -----Original Message----- From: Joshua McAdam [mailto:[EMAIL PROTECTED] Sent: 14 January 2005 06:30 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Has anyone logged a support issue with HP on this one? I still haven't been able to get it working so far, So I'm going to log a support issue here in australia to see what HP can do about this and was wondering if anyone else has. Josh -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Lopez Sent: Monday, 10 January 2005 4:22 PM To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server Make sure you has a span defined for each port on the TE410P. With out signaling it would not take interrupts. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karl H. Putz Sent: Monday, January 10, 2005 12:38 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server I have been having this exact problem with a Tatung dual EMT-64 server as well. I have been trying to get a TE410P running and all looks great, driver loads, runs ztcfg OK, etc. but no interrupts are ever processed. One additional piece of info that I have not seen in this thread is that I am able to successfully start and run a T100P card in this system. In the same PCI slot, wct1xxp driver built from the same CVS HEAD version as the wct4xxp. Just hoping this might shed some light on the problem for any Digium folks monitoring the forum. Karl Putz _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users The information contained in this email is intended for the personal and confidential use of the addressee only. It may also be privileged information. If you are not the intended recipient then you are hereby notified that you have received this document in error and that any review, distribution or copying of this document is strictly prohibited. If you have received this communication in error, please notify Brendata immediately on: +44 (0)1268 466100, or email '[EMAIL PROTECTED]' Brendata (UK) Ltd Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK Registered Office as above. Registered in England No. 2764339 See our current vacancies at www.brendata.co.uk _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users