The only Caller ID phone I can get to work on the TDM card is one with belcore caller ID, the UK callerid phones do not work here.
Regards Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Lyle Giese Sent: 27 January 2005 17:47 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] TDM-400P + CallerID You really don't need the wait(exten => s,1,Wait(2)). cidsignalling=dtmf cidstart=polarity I am not familar with these options as they don't apply to the US. Here callerid info is sent between the first and second ring as FSK(old modem signaling). It may be that the FXS channels are doing that and your equipment is not setup to do that. Lyle ----- Original Message ----- From: Pieter Arentz To: asterisk-users@lists.digium.com Sent: Thursday, January 27, 2005 10:07 AM Subject: [Asterisk-Users] TDM-400P + CallerID Hi, I’m just starting out with Asterisk, in combination with a TDM400, filled with 2 FXS on channels 1 and 2, and 1 FXO on 4. Having just started, all I want right now is to be able to answer incoming calls on a phone connected to channel 1. The trouble is the caller id. I have caller id enabled on my line, my phone supports it, and when I connect the phone directly to the line, it works. However, it doesn’t work with *. When I call myself (with a cellphone), and I type “show channel zap/4-1” in the * console, it shows my cellphone# in the caller id field. Asterisk gets the correct callerid from my line, appearantly. When I type “show channel zap/1-1”, the caller id just shows ‘s’. I have a feeling that this s is the originating extension, seen from the FXS’ point of view. My phone just shows ‘external call’, instead of a number. How do I make * forward the callerid from the incoming call to my phone? --Pieter My zapata.conf: context=buitenlijn signalling=fxs_ks immediate=yes usecallerid=yes cidsignalling=dtmf cidstart=polarity hidecallerid=no callerid=asreceived callwaiting=no callwaitingcallerid=no adsi=no channel => 4 signalling=fxo_ks language=nl usedistinctiveringdetection=no busydetect=yes echocancel=yes echotraining=no channel => 1 channel => 2 My extensions.conf: [buitenlijn] exten => s,1,Wait(2) exten => s,2,Dial(Zap/1,30,t) _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users