On Friday 28 January 2005 05:41 pm, Steven Critchfield wrote: > On Fri, 2005-01-28 at 11:35 -0600, Jon Gabrielson wrote: > > I have an adit 600 with an fxo card connected to a digium T1 card. > > If I try to make an outgoing call and the T1 cable is disconnected, > > asterisks returns congested like it should. > > But, if the adit 600 is connected to the T1 card, the adit 600 > > immediately "answers" the call even if there are no physical > > lines attached. I even removed the fxo card and the adit > > 600 still "answers" the outgoing call even though it obviously > > has no way to actually route the call. > > > > How do I tell asterisk and/or the adit 600 to make sure it has > > a dialtone before it answers the call and tries to route it? > > Trouble with analog lines. What type of signal do you think the ADIT > should send when it doesn't have a loop?
I'm not for sure, I know my x100p card is somehow able to tell asterisk when there is no dialtone. I just assumed that asterisk would be able to detect the dialtone or lack of dialtone and try a different line if no dialtone was detected. Jon. _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users