The digium X100P is probably fine. What most of these people are talking about are the X100P clones which are of varying qualities. I have had no problems, but results vary.
Cheers, Jon. On Sunday 30 January 2005 09:42 am, dean collins wrote: > Why does the X100P have echo and the Wildcard TDM400P have no echo? > > > > I thought the only advantage of using the TDM400P was that it used less > interrupts than the X100P? > > Are there any other advantages? > > > > > > > > Cheers, > > Dean > > > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Remco > Barende > Sent: Sunday, January 30, 2005 10:08 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] where to buy x100p > > >> Want to buy the X100P clones I have? :) > > > > About the best thing that you can do to reduce Echo on the X101P and > > X100P > > > cards is to; > > > > > > > > 1. Set the following in zapata.conf; > > > > > > > > echocancel=128 > > > > echocancelwhenbridged=no > > > > echotraining=800 > > > > > > > > 2. Enable aggressive echo cancellation in zaptel's zconfig.h file; > > > > > > > > /* > > > > * Uncomment for aggressive residual echo supression under > > > > * MARK2 echo canceller > > > > */ > > > > #define AGGRESSIVE_SUPPRESSOR > > > > > > > > I've had much better luck at killing Echo issues with the above > > > > suggestions, on both my P133 X101P box as well as my TE405P based PRI > > > > Gateways. It doesn't solve all the issues, but it does help quite > > > > noticeably. > > Thanks for the tip. However, I have been trying evening after avening to > > > get the echo out by tweaking the settings. When I received the TDM11 I > > pulled out the X101P clone followed the example config at the Digium > site > > and I was up and running without any. I don't mind trying to play around > > > but wasting a lot of time on really cheap hardware was too much waste of > > > time when I look back :) > > > > It's probably possible to get the echo out but it's not worth it for me > to > > figure it out :) > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users