Can I still use the Digium cards if I use bristuff? I bought a
Digium TE110P and will problem run into the same problem
Thanks!
Remco
On Mon, 31 Jan 2005, Klaus-Peter Junghanns wrote:
Hi,
standard asterisk doesnt support that. However it's in
bristuff (www.junghanns.net/asterisk) zapata.conf:
nationalprefix=0
internationalprefix=00
best regards
Klaus
Am Montag, den 31.01.2005, 20:04 +0100 schrieb Frank Sautter:
hi,
on our incoming E1-PRI from german telco Arcor the leading 0 for the
(area access code in europe) and the 00 (country accescode in europe)
are missing on incoming callerids.
only prepending a single 0 is not the solution as suggested by some
writers on this list, because there is no way to differ between national
and international callerids and it's not possible to make the decission
based on the length of the presented callerid, as the length of the
callerid can vary in most countries.
e.g.: i'm getting signalled 4123456789 which could be a call from
"Barmstedt (Germany)" which has the areacode '4123' or from Switzerland
which has the countrycode '41'
somehow our ericsson businessphone 250 fromerly connected to the same
E1-PRI was capable of showing the correct number of leading 0s?!?
regards
frank
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
