Erros on boot. Running Release 1 Latest Version. Feb 2 13:32:20 localhost kernel: Zapata Telephony Interface Registered on major 196 Feb 2 13:32:20 localhost kernel: Freshmaker version: 71 Feb 2 13:32:20 localhost kernel: Freshmaker passed register test Feb 2 13:32:29 localhost kernel: Module 0: Installed -- AUTO FXS/DPO Feb 2 13:32:29 localhost kernel: Timeout waiting for calibration of module 1 Feb 2 13:32:29 localhost kernel: Timeout waiting for calibration of module 1 Feb 2 13:32:29 localhost kernel: Proslic Failed on Second Attempt to Auto Calibrate Feb 2 13:32:29 localhost kernel: Module 1: Installed -- MANUAL FXS Feb 2 13:32:29 localhost kernel: Module 2: Installed -- AUTO FXO (FCC mode) Feb 2 13:32:29 localhost kernel: Module 3: Installed -- AUTO FXO (FCC mode)
It used to boot no problem... Jan 17 14:51:12 localhost kernel: Zapata Telephony Interface Registered on major 196 Jan 17 14:51:12 localhost kernel: Freshmaker version: 71 Jan 17 14:51:12 localhost kernel: Freshmaker passed register test Jan 17 14:51:15 localhost kernel: Module 0: Installed -- AUTO FXS/DPO Jan 17 14:51:15 localhost kernel: Module 1: Installed -- AUTO FXS/DPO Jan 17 14:51:15 localhost kernel: Module 2: Installed -- AUTO FXO (FCC mode) Jan 17 14:51:15 localhost kernel: Module 3: Installed -- AUTO FXO (FCC mode) Is the card going Bad. No Changes have been made to the Hardware and the Zaptel.conf is still the same as always fxoks=1 fxoks=2 fxsks=3 fxsks=4 loadzone=us defaultzone=us Zapata is still the same context=from-pstn signalling=fxo_ks faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=800 group=1 channel=1 context=from-pstn signalling=fxo_ks faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=800 group=1 channel=2 context=from-pstn signalling=fxs_ks ;rxgain=10.5 ;txgain=-4.5 faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=800 group=0 channel=3 context=from-pstn signalling=fxs_ks faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=800 group=0 channel=4 Not sure if I need to send the card back or not. Thanks for your consideration into this issue. Ron _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users