I mean IM based sip with RFC 3428 not AIM,Jabber,... and rfc3265 SUBSCRIBE/NOTIFY
harry --- Noah Miller <[EMAIL PROTECTED]> a écrit : > > >I'm able to register sip friends with asterisk > >but i wish to use presence and instant messaging. > >asterisk sent back "Proxy Authentication required > >407" when SUBSCRIBE is sent to asterisk. > > > > > I don't think you'll have much success. I don't > think asterisk can do > that. As far as I know, asterisk does not do > instant messaging. You > can check on the feature list and with the > developers, but I'm pretty > sure that's not possible. See the wiki here: > > http://www.voip-info.org/wiki-Asterisk+presence+jtodd > > > >harry > > > > --- Noah Miller <[EMAIL PROTECTED]> a écrit : > > > > > > >>Hi Harry - > >> > >> > >> > >>>Can you get SUBSCRIBE registration ?? > >>> > >>> > >>I don't know what SUBSCRIBE registration is, but > >>looking at your > >>sip.conf, there's a couple of things I would > change: > >> > >>[100] > >>type=friend > >>username=100 > >>secret=100 > >> > >>fromuser=100 > >>; Take this out - it's only needed when you want > >>certain types of sip > >>proxies are trying to > >>; register to this peer - not normally needed for > >>asterisk. > >> > >>host=dynamic > >>context=sip > >> > >>dtmfmode=rfc2833 > >>; I'd use inband here. I've tried rfc2833 here, > >>too, but it doesn't > >>seem to work as well as inband > >> > >>progressinband=no > >>; You don't really need this, and I think it > doesn't > >>make sense if > >>you're doing rfc2833 dtmfmode > >> > >>On the Polycom side, you should use the following > >>info: > >> > >>Address: 100 > >>Auth User ID: 100 > >>Auth Password: 100 > >> > >>Other than the SIP server address, these are the > >>only important numbers > >>on the Polycom. > >> > >>- Noah > >> > >> > >> > >> > >>> --- Noah Miller <[EMAIL PROTECTED]> a > >>> > >>> > >>écrit : > >> > >> > >>>>Hi Harry - > >>>> > >>>> > >>>> > >>>>>I try to set up two lines per ip 300 phone, > >>>>>registration is ok but i get Failure to > >>>>> > >>>>> > >>>>authenticate > >>>> > >>>> > >>>>>407 for subscribe. > >>>>> > >>>>> > >>>>What version of the SIP firmware are you using? > >>>>I've had success with > >>>>1.3.0, 1.3.1, 1.3.4, and 1.4.1. > >>>> > >>>>My sip.conf entries for my Polycom phones look > >>>> > >>>> > >>like > >> > >> > >>>>this: > >>>> > >>>>[12] > >>>>type=friend > >>>>username=12 > >>>>secret=12 > >>>>callerid="12" > >>>>host=dynamic > >>>>dtmfmode=inband > >>>>context=no-callwaiting > >>>>[EMAIL PROTECTED] > >>>>disallow=all > >>>>allow=ulaw > >>>> > >>>>Are you configuring directly on the phone, or > >>>> > >>>> > >>using > >> > >> > >>>>an FTP or TFTP > >>>>server? > >>>> > >>>> > >>>> > >>>> > >>>>>Anybody could help me to configure Asterisk in > >>>>> > >>>>> > >>>>order > >>>> > >>>> > >>>>>to set instant message and presence ? > >>>>> > >>>>> > >>>>To the best of my knowledge the Presence feature > >>>> > >>>> > >>of > >> > >> > >>>>the Polycom phones > >>>>does not work with Asterisk. I believe it only > >>>>works with other IM > >>>>clients. > >>>> > >>>>Hope this helps! > >>>>Noah > >>>> > >>>> > >>>> > >>>> > >>> > >>> > >>> > >>> > >>>Découvrez le nouveau Yahoo! Mail : 250 Mo > d'espace > >>> > >>> > >>de stockage pour > >> > >> > >>>vos mails ! > >>>Créez votre Yahoo! Mail sur > >>> > >>> > >>http://fr.mail.yahoo.com/ > >> > >> > >> > >> > > > > > > > > > > > > > >Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace > de stockage pour vos mails ! > >Créez votre Yahoo! Mail sur > http://fr.mail.yahoo.com/ > > > > > Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/ _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users