Hi, I am pretty new to all of this but was able to set up an asterisk server and have been able to succesfully connect to asterisk with x-lite as sip client. I have also connected asterisk to FWD (using iax2) and to voipjet (also using iax2). Now I am trying to connect asterisk to Stanaphone. It has to register as a SIP client but I am not being succesful at all. My asterisk server sits behind a Linksys WRT54GS router (latest linksys firmware) acting as DHCP and NAT for my home equipment. I have tried forwarding the SIP and RTP ports to the asterisk machine, and I have also tried putting the asterisk machine on the routers DMZ. No luck. I have tried every configuration recommended for stanaphone that I found on the web, including a couple I found on the asterisk wiki and a few I found on the stanaphone forums. I tried, explicitly defining the private and public ips, qualifying, using the same number as assigned in stanaphone for my local extension (a recommendation I found), etc. Then I found a message in a forum about a person with the same problem that claims it got fixed when asterisk was put with a public IP address. So my question is.... is it at all possible to connect asterisk as a SIP client when it sits behind a NAT? If yes, can somebody tell me what I should do please. thank you, -guillermo PS1.- When I connected the x-lite to asterisk both where on the same side of the NAT PS2.- The error I continuosuly get is "SIP/2.0 401 Unauthorized". PS3.- I connected x-lite directly to stanaphone with no problems even behind the nat...and I didn't have to set any port forwarding or anything...so I am thinking that whatever x-lite is doing asterisk should do...how do I emulate what its doing?
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users