Does anyone have any experience ith configureing the sangoma A102 card for testing using a e1 cross cable i've configured and installed the cards properly even the lights on the card are green which proves that my cross cable is properly built too. my problem is with asterisk which gives me these errors
PRI got event: HDLC Abort (6)on Primary D-channel of span 1 PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2 No D-channels available! Using Primary on channel anyways 47! PRI: !! Not good - head of queue has not been transmitted yet I've tried everything i can think off with the wancfg configuration files here is my zaptel and zapata configs. span=1,0,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 span=2,1,0,ccs,hdb3 bchan=32-46 dchan=47 bchan=48-62 -------------------------- zapata.conf switchtype=euroisdn signalling=pri_net group=1 channel=>1-15 channel=>17-31 group=2 signalling=pri_cpe channel=>32-46 channel=>48-62 ------------------------------- do i need to fool around with some jumpers on the card or something to activate internal clock on the card. zttol says INTERNALLY CLOCKED for both the ports. There are NO Alarms and no missed IRQ's I'm using asterisk 1.0.5 on debian with 2.4.29 kernel -- regards Vikram (http://www.vicramresearch.com) _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users