I found out the CD's I made were OK - I used one on a different computer and it worked fine.

[EMAIL PROTECTED] doesn't like the current Asterisk box I'm using now. It's an IBM Netfinity 3500 - dual 233MHz processor, SCSI, 512MB, DVD-ROM, blah,
blah. That's the only computer I get the error message with. I'll buy a new computer and switch others around and put it on a different one.


Thanks for the offers for CD's, but for some reason [EMAIL PROTECTED] doesn't like the IBM computer. I know it's only a dual P-II 233 system and [EMAIL PROTECTED] states it wants 300MHz, but my current AMP/Asterisk installation works great on the box now.



----- Original Message ----- From: "Roderick A. Anderson" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<[email protected]>
Sent: Sunday, February 13, 2005 10:20 AM
Subject: Re: [Asterisk-Users] [EMAIL PROTECTED] .05 release questions on
setup.



Roger Hanson wrote:

I've downloaded 2x and burned 2 cds and get an error "invalid
compressed format (err=2) system halted" message both times.

It'd be nice to have a MD5 to verify my download is OK.  It'd narrow
down the problem to either the download or the burn, wouldn't it?

Here is an _un-official_ md5sum from my burnable and installable image.

   9d5657b7c833830b8a1fd1f024215d46  asteriskathome-0.5.iso

I got it to install yesterday but ran into a couple of errors after
the final reboot ( asterisk did compiled , etc. ) that I have to sort
out today.  One was I only had 128 MBytes of RAM and got an error that
some program wouldn't run with less than 256.  I'm doing this between
LUG meetings and week-end jobs so if there is an error and I don't
have time to work on it then I come back to it later.  Bought more RAM
yesterday.
  The other error was about FXS and FXO not being configured correctly
and I suspect it was because I didn't have a phone line plugged in to
the TDM400P.  This for today also.

What did you use to download the iso?  If you're stuck with a Windows
system and using MS's FTP program remember it defaults to ASCII mode.
( Sorry if this is a lame suggestion. :-)


Rod --

---
[This E-mail scanned for viruses by Declude Virus]

_______________________________________________
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users




_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to