Anyone using the UIP200 with *? I am having difficulty getting the phone to register and *stay* registered for more than 4 seconds.
The * console shows the UIP200 registering and records the user agent. The UIP200 displays station name and time on its LCD, then 4 seconds pass and it shows #1 DISCONNECTED. The * console reports no problem and believes the device to still be registered. A call can be placed from or received by the UIP200 if it happens within the 4 seconds. Immediately upon hanging up, it shows #1 DISCONNECTED. I have tried firmware version 4.63 and 4.59. My unidencom.txt (for 4.63): # UIP200 Mass Configuration System Generic File # Notes: # 1. Lines start with '#' are comments # 2. To leave a field value unchanged (as saved on local phone), leave value to blank. # 3. To set a field's value to empty, use '-' as value. # 4. To NOT overwrite user local settings of: programmable key, one/two touch keys, VMA # number, VMWILampIndicator, set "OverwriteLocalSetting = NO". Default is "YES". This # key will ALSO affect whether or not THESE settings in uniden<MAC>.txt be used. # 5. Any duplicate parameters exist in both unidencom.txt and uniden<MAC>.txt, MAC settings # will be used. # MAXIMUM FILE SIZE IS 10KB # Current Limitation: No spaces allowed for a setting's value # Version: BS4.63 #Overwrite user local settings of programmable keys, one/two touch keys, vma settings #If set to no, these current settings on the phone will not be overwritten. OverwriteLocalSettings YES # must be placed on top of config file # Sip Settings --If only ProxyServer needed, set OutboundProxy1/Port same as ProxyServer/Port ProxyServer 192.168.100.34 # can be an IP address or FDQN ProxyServerPort 0 # 0 to use default port OutboundProxy1 192.168.100.34 # can be an IP address or FQDN OutboundProxy1Port 0 # enter a port number or 0 for default (5060) OutboundProxy2 192.168.100.34 # can be an IP address or FQDN OutboundProxy2Port 0 # enter a port number or 0 for default (5060) EmergencyProxy 192.168.100.34 EmergencyProxyPort 0 Registrar1 192.168.100.34 # can be an IP address or FQDN Registrar1Port 0 # enter a port number or 0 for default (5060) Registrar2 192.168.100.34 # can be an IP address or FQDN Registrar2Port 0 # enter a port number or 0 for default (5060) RegisterExpireSec 3600 Q_Param 50 RegisterExpireLimitPercent 10 Register403RetrySec 1200 SipPort 5060 SRVRecordName - #_sip._udp.uniden.com FailoverRetrySec 4 # For Redundant Outbound proxy server #InterDigitTimer Value in milli seconds (minimum is 1000ms = 1Second) InterDigitTimer 4000 # options are ON or OFF SessionTimerSupport ON # options are ON or OFF SessionTimerRefresher ON SessionTimerMin 60 TimerInterval0 300 TimerInterval1 150 # Audio Settings G711MuTxPacketLength 20 G711MuJitterBufferLength 10 G711MuJitterBufferMax 200 G711ATxPacketLength 20 G711AJitterBufferLength 10 G711AJitterBufferMax 200 G729TxPacketLength 20 G729JitterBufferLength 10 G729JitterBufferMax 200 LongHoldAlertPeriod 360 RTPPortBase 25000 # options are ON and OFF DiffServMode OFF DefaultDiffServParam 192 RTPDiffServParam 160 # options are TRUNKMODE, CASCADEMODE, DISABLE VlanMode DISABLE VlanID 1 PcVlanID 2 #SNTP Settings # choices are YES and NO EnableSNTP NO # SNTP Server IP address SntpServerIP 199.240.130.12 # ntp1.kansas.net TimeZone -6 # -6 For Central Time Zone # choices are YES and NO EnableDST YES # Time period (in seconds) before recontacting SNTP server SntpRetrySec 1800 # preferred codec are listed from most preferred, separated by commas and NO space PreferredCodec g711u,g711a,g729 # choices are English, Spanish, and French Language English #choices are Enable and Disable CallWaiting Enable # EmergencyProxyPrefix ** # STUN: If Server IP sis 0.0.0.0 STUN is disabled StunServerAddr 0.0.0.0 #stun.fwdnet.net StunServerPort 0 # 3478 #Periodic update in seconds of MEDIA NAT ports (minimum is 10 and set 0 to disable) StunServerUpdateSec 0 # 30 #Periodic update in seconds to keep SIP NAT port open (minimum is 10 and set 0 to disable) StunServerNATKeepAliveSec 0 # 30 # ALLOW IP DIALING with # as the first digit map DirectIpDialing Enable #Enable/Disable # Set YES to AllowSharpAsDial to have # as your DIAL key. AllowSharpAsDial No #Yes/No #Flash Based Service Parameters: # DTMFFlashEvent (Enable/Disable) -- Send RFC2833 Event 16 when enabled and XFER button is pressed. DTMFFlashEvent Disable #HotLineDisplay (Enable/Disable) -- Do not display HOTLINE on LCD when Hotline Number is set HotLineDisplay Disable #User Agent Name Settings. Use Character "^" for space UseCustomizedUserAgentName No CustomizedUserAgentName Uniden^Customized^UA #Admin password must be numeric. Max is 6 digits. Format: oldpassword/newpassword #AdminPassword 1234/1111 #end_of_file My uniden<mac>.txt (for 4.63): # UIP200 Mass Configuration System Mac-based File # Notes: Lines start with '#' are comments # To leave a field value unchanged (as saved on local phone), leave value to blank. # To disable a field, use '-' as value # MAXIMUM FILE SIZE IS 10KB # Current Limitation: No spaces allowed for a setting's value # Version: BS4.63 # Firmware. The items listed in this Firmware section must be in this order. # FirmwareVersion and FirmwareFileName only used if AutoFirmwareUpdate is YES # FimrwareFileName only used if FirmwareVersion differ from firmware ver in Flash # Note: If you would like to perform firmware update on ALL your UIP200's, you would # want to move the 3 lines below to unidencom.txt file, then you don't have to modify # MAC-based files individually. Refer to Users Manual for details. AutoFirmwareUpdate YES #choices are YES and NO FirmwareFileName uip200_463enc.pac FirmwareVersion BS4.63 # Sip Settings MyLcdDisplay Rob's_Office MyDialNumber rob_office DisplayName rob_office UserNameForProxy - PasswordForProxy - UserNameForRegistrar - PasswordForRegistrar - # Programmable Keys. Key functionality must go before key values. ProgrammableKey1 OneTouchDial ProgrammableKey2 OneTouchDial ProgrammableKey3 OneTouchDial ProgrammableKey4 CallForward ProgrammableKey5 TwoTouchDial ProgrammableKey6 DoNotDisturb ProgrammableKey7 VMA ProgrammableKey8 Mute # One and Two-touch keys. Must go after Programmable keys functionality definitions. # Refer to Programmable and Fixed Function Keys for usage guide # OneTouchKeyX value is used ONLY when ProgrammableKeyX is OneTouchDial OneTouchKey1 18005558355 OneTouchKey2 5553456 OneTouchKey3 3456 OneTouchKey4 3457 OneTouchKey5 3458 OneTouchKey6 918005558355 OneTouchKey7 3459 OneTouchKey8 3450 TwoTouchDigit0 3469 TwoTouchDigit1 3450 TwoTouchDigit2 4420 TwoTouchDigit3 4421 TwoTouchDigit4 4422 TwoTouchDigit5 4423 TwoTouchDigit6 4424 TwoTouchDigit7 4425 TwoTouchDigit8 4426 TwoTouchDigit9 4427 # Hotline and vmwi numbers --Must be placed after OneTouchDial's HotLineNumber - VmaDirectCallNo 3685 #value associating with VMA Programmable key. VmwiLampIndicator Enable TimeDisplay Enable ImportPhoneBook No #end of file My sip.conf entry for this device (* 1.0.5): [rob_office] type=friend host=dynamic defaultip=192.168.100.204 ;username=rob_office ;secret=1234 dtmfmode=rfc2833 ; Choices are inband, rfc2833, or info ;mailbox=1000 ; Mailbox for message waiting indicator context=sip callerid="Rob's Office" <2122> ;nat=route nat=never ;qualify=yes ;qualify=no ;canreinvite=yes ;canreinvite=no ;port=5060 I have seen no responses to my earlier post: http://lists.digium.com/pipermail/asterisk-users/2005-February/089944.html and my problem persists. Would someone please share their configs and firmware versions? Many thanks for any help, experiences shared. Rob __________________________________ Do you Yahoo!? The all-new My Yahoo! - Get yours free! http://my.yahoo.com _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users